TH 1020 Lecture Notes - Lecture 7: Pliers, Chisel, Staple Gun
Document Summary
Measuring marking tools: framing square, tri-square or trysquare (one edge with measurements, combination square, protractor, speed square, angle gauge, tape measurers hooks and blade, level, chalk line (blue v. red chalk, compass, plumb bab, spirit level. Cutting tools: cross-cut raw, miter saw, coping saw, keyhole saw, pipe cutter, reamer, conduit cutter, die or thread cutter, tin snips, hack saw, utility knife, hole saw, bolt cutters, saber/ jig saw, sawzaw/ reciprocating saw. Power tools: band saw, radial arm saw, miter saw, circ saw, drill press. Driving/ prying hand tools: curved claw hammer, framing hammer, ballpeen hammer, rubber mallet, track hammer, sledge hammer, dead blow mallet, hatchet. Driving power tools: cordless drill (screw gun, electric drill, hammer drill, pneumatic staple gun, pneumatic nail gun, corrugated pneumatic nail gun. Driving tools: allen key set, nut driver, socket ratchet wrench, yankee screw driver, flat blade screw driver, phillips screw driver. Drill bits: paddle bit, mortis bit, twist bit, counter sink.
