NET 4000 Chapter Notes - Chapter 11.6.4: Mx Record, Hostname, Nslookup
Document Summary
The best way to verify if a connection is valid is to check the link light on both the workstation and the switch. If the link light is unlit, try the following: This will help determine whether the cable is the problem. Try using a different switch port for the connection. Make sure that the card is properly seated. Use loopback plugs to test network cards and cable testing devices to test network cables. Interference is caused by electromagnetic fields or radio frequency interference. For wired cables, make sure wires are not routed next to motors or fluorescent lights that can cause interference. For wireless devices, make sure there are no other devices in the area transmitting on the same frequency and channel (e. g. , microwaves or cordless phones). Check to make sure that the cable is not kinked or worn. Cables should be routed through walls or ceilings, not strung across the floor.