Air in an ideal Diesel cycle is compressed from 3 L to 0.15 L and then it expands during the constant pressure heat addition process to 0.3 L. Under cold air standard conditions, the thermal efficiency of this cycle is?

At the beginning of the compression process of an air standard otto cycle. P1= 1 bar, T1= 290k and V1= 400cm^3. The max Temperature in the cycle is 2200 K and the compression ratio is 8.

Determine

A) the heat addition in KJ

B) the Net-work in kJ

c) the thermal efficiency

An ideal Otto cycle with Argon as the working fluid has a compression ratio of 6.8. The minimum and maximum temperatures in the cycle are 450 R and 2,260 R. Assuming constant specific heats, determine

(a) the amount of heat transferred to the argon during the heat-addition process

(b) the thermal efficiency

(c) the thermal efficiency of a Carnot cycle operating between the same temperature limits

An ideal Otto cycle has a compression ratio of 10.5, takes in air at 90 kPa and , and is repeated 2500 times per minute. Using constant specific heats at room temperature, determine the thermal efficiency of this cycle and the rate of heat input if the cycle is to produce 90 kW of power.